Our level of experience guarantees accurate and timely reporting; as well as, a good understanding of National and Local Code requirements. We provide you a full detailed inspection report after every inspection and or test, so you will be aware of your equipment status at anytime. Within the Services that SFES Corp offers, you will find:

Annual/Routine Inspections

The examination and operation of equipment at specified intervals by an elevator inspector to check for compliance with the applicable Code requirements.

Periodic Tests

The testing and detailed examination and operation of equipment at specified intervals witnessed by an elevator inspector to check for compliance with the applicable Code requirements. Building owner or his agent shall provide qualified personnel to perform the tests specified in the applicable Code or Regulations. The elevator inspector should be accompanied by a person familiar with the operation of the equipment to assist him during the inspection as required by ASME A17.2 2012.

Acceptance Inspections

The initial inspection and test of new or altered equipment by an inspector to check for compliance with applicable Code requirements. Building owner or his agent shall provide qualified personnel to perform the tests specified in the applicable Code or Regulations. The elevator inspector should be accompanied by a person familiar with the operation of the equipment to assist him during the inspection as required by ASME A17.2 2012.

Inspection for Temporary Construction Use

Permanent passenger or freight elevators installed in buildings under construction, modification or demolition may be used for carrying workers or materials or both provided the elevators are approved for such use and a temporary permit is issued for the class of service for which approval is granted by the authorities or department having jurisdiction. When elevators handle personnel during construction and operate in permanent hoist ways on permanent guide rails, these elevators shall conform to the applicable requirements of ANSII/ASME A 17.1 Safety Code for Elevators and Escalators.

Qualified Elevator Inspector

All of our inspectors possess the National Qualified Elevator Inspector (QEI) as well as the Certified Elevator Inspector (CEI) required by Jurisdictions when performing inspections in compliance with ASME A17.1, Safety Code for Elevators and Escalators and ASME QEI-1-2013.